NASA lands Perseverance rover on the Mars surface, carrying the first helicopter for another planet5 min read

[ad_1]

NASA successfully landed its fifth robotic rover, Perseverance, on the surface of Mars on Thursday after its six-month voyage from Earth.

“Touchdown confirmed,” NASA’s Jet Propulsion Laboratory mission control said at 3:55 p.m. ET. “Perseverance safely on the surface of Mars, ready to begin seeking the sands of past life.”

The rover is the most technologically advanced robot NASA has ever sent to Mars. The agency aims to spend nearly two years using it to explore the surface. NASA spent about $2.4 billion to build and launch the Perseverance mission, with another $300 million in costs expected for landing and operating the rover on the Mars surface.

Based on its predecessor Curiosity, which reached Mars in August 2012 and is still in operation, the Perseverance rover was built by NASA’s JPL in California. Multiple companies contributed to parts of the spacecraft, such as the Lockheed Martin-built heat shield, Aerojet Rocketdyne-built rocket thrusters and the Maxar Technologies-built robotic arm.

Perseverance is also carrying a small helicopter named Ingenuity, which NASA plans to use to attempt the first flight on another planet.

Engineers observe the first driving test for NASA’s Mars 2020 Perseverance rover in a clean room at NASA’s Jet Propulsion Laboratory in Pasadena, California, on Dec. 17, 2019.

NASA/JPL-Caltech

The rover, about the size of a small car, weighs about 1 ton and is 10 feet long by 9 feet wide by 7 feet tall. It has a robotic arm that reaches about 7 feet, the end of which has a robotic “hand” that has a camera, a chemical analyzer and a rock drill. Perseverance is nuclear powered, with a plutonium generator provided by the U.S. Department of Energy to generate electricity for its pair of lithium-ion batteries.

Perseverance traveled 293 million miles to reach Mars over the course of more than six months after it launched on a United Launch Alliance Atlas V rocket on July 30.

Sticking the landing

This illustration shows the events that occur in the final minutes of the nearly seven-month journey that NASA’s Perseverance rover takes to Mars

NASA/JPL-Caltech

The rover’s landing featured the typical “seven minutes of terror” that NASA engineers describe in any spacecraft attempt to land on Mars. That’s the time it takes to enter the Martian atmosphere and descend to the surface, and it’s named as such because it takes 11 minutes for any communication to travel from the rover back to Earth — meaning the time delay requires that the spacecraft and rover perform the landing autonomously.

Perseverance entered the Martian atmosphere in a capsule that protected the rover as it traveled at about 12,100 miles per hour. The spacecraft then deployed a parachute to begin slowing down before jettisoning the capsule and heat shield, and then firing its rocket thrusters to slow itself down from about 170 mph to about 2 mph.

An animation of the spacecraft carrying Mars rover Perseverance firing its thrusters to slow down for landing.

NASA/JPL-Caltech

The spacecraft next deployed its “sky crane,” which lowered the rover the remaining few feet down to the surface.

An animation of Mars rover Perserverance being lowered to the Mars surface by the “sky crane.”

NASA/JPL-Caltech

Perseverance landed in the Jezero Crater, a 28-mile-wide basin in the northern hemisphere of Mars. It’s a place where NASA believes a body of water about the size of Lake Tahoe used to flow. NASA’s science team hopes the ancient river delta may have preserved organic molecules and other potential signs of microbial life, which Perseverance will attempt to detect with its instruments.

The target landing area of NASA’s Perseverance rover is overlaid on this image of its landing site on Mars, Jezero Crater.

ESA/DLR/FU-Berlin/NASA/JPL-Caltech

In addition to its scientific instruments, the rover also carries a commemorative plate to honor Covid-19 health-care workers and recognize the impact of the pandemic.

The rover also has the names of 10.9 million people stenciled into three silicon chips on the rover, with the words “Explore as one” written in Morse code.

Perseverance’s mission

The rover is packed with cameras to capture its expedition and chock full of scientific instruments to measure the planet’s geology and collect samples that NASA aims to one day return to Earth.

NASA plans to drive Perseverance around the surface for one Martian year, which is equivalent to 687 days on Earth.

It has seven major instruments for a wide variety of purposes: the Mastcam-Z; the Mars Environmental Dynamics Analyzer, or MEDA; the Mars Oxygen In-Situ Resource Utilization Experiment, or MOXIE; the Planetary Instrument for X-ray Lithochemistry, or PIXL; the Radar Imager for Mars’ Subsurface Experiment, or RIMFAX; the Scanning Habitable Environments with Raman & Luminescence for Organics & Chemicals, or SHERLOC, and the SuperCam.

The rover also has a sample caching system, which has nine different drill bits and many sample collection tubes to capture pieces of the Mars surface.

“Perseverance is the first rover to bring a sample caching system to Mars that will package promising samples for return to Earth by a future mission,” NASA said in a press release. “Rather than pulverizing rock the way Curiosity’s drill does, Perseverance’s drill will cut intact rock cores that are about the size of a piece of chalk and will place them in sample tubes that it will store until the rover reaches an appropriate drop-off location on Mars.”

NASA hopes to return the samples as part of a campaign in partnership with the European Space Agency some time in the future.

The rover is designed to cover more ground than any other robot sent to Mars before. NASA designed Perseverance to drive an average of 650 feet per Martian day, which is close to the longest drive previously completed in a day at 702 feet by NASA’s Opportunity rover.

Aiming for first flight on another planet

The Perseverance rover, with the Ingenuity helicopter visible attached underneath, prepared for launch.

NASA/JPL-Caltech

Perseverance is also carrying the Ingenuity helicopter. NASA plans to deploy the helicopter from underneath Perseverance in a flat area a couple of months after the landing. The rover will then drive about 330 feet away, to capture the flight attempt with the rover’s cameras.

An animation of the Perseverance rover deploying the Ingenuity helicopter.

NASA/JPL-Caltech

If all goes well, Ingenuity’s flight will be the first powered controlled flight on another planet, in what NASA describes as “a Wright Brothers moment” on Mars.

An animation of the Ingenuity helicopter taking its first flight on Mars.

NASA/JPL-Caltech

[ad_2]
learn more

Leave a Reply